SPECIFICATIONS
| SIGNAL FORMATS: |
486i /59.94 (see note 1)
576i /50 (see note 1)
720p / 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Hz
1080sF / 23.98, 24, 25, 29.97, 30 Hz
1080i / 50, 59.94, 60 Hz
1080p / 23.98, 24, 25, 29.97, 30 Hz Dual-link
1080sF / 23.98, 24, 25, 29.97, 30 Hz
1080i / 50, 59.94, 60 Hz
1080p / 23.98, 24, 25, 29.97, 30 Hz
|
ITU-R BT.656.4
SMPTE 296M
SMPTE 274M,
SMPTE, 372M |
 |
| VIDEO INPUTS: |
SDI/HDSDI
HDSDI Dual Link
DVI-D at 1920 x 1200, 50-60Hz.
1 Reference Sync input tri-level or bi-level sync
|
SMPTE 292M/372M |
|
| VIDEO OUTPUTS: |
HD-SDI
HD-SDI Dual Link
DVI-D at 1920 x 1200
|
SMPTE 292M/372M |
|
| DISPLAY: |
24 inch a-Si TFT Active matrix LCD
Resolution: 1920 x 1200 (1920 x 1080 active video area)
Contrast Ratio: 1000:1
Brightness: 500Cd/m 2
Response time: 15ms
Viewing angle: 89/89/89/89
Pixel mapping to native resolution of input
|
|
|
| COLORSPACE: |
In all dual-link formats, data may be RGB or Y,Cb,Cr 4:4:4, 8 or 10 bit, linear & logarithmic
|
|
|
| SERIAL: |
USB
|
|
|
| NETWORK: |
Ethernet - 100 BaseT
Wireless DSSS - IEEE802.11b,g 54Mbps
|
|
|
| GENERAL: |
Power: 120/220 AC or 24vdc ; 200W
Weight: 39 lbs Dimensions (WxHxD) : 21.5”x17”x3”
Operating Temperature 0-40o C
|
|
|
| CERTIFICATIONS: |
FCC, CE
|
|
|
| OPTIONS: |
OmniTek HD Dual Link Waveform Monitor and Vectorscope (2142 & 2122 only)
OmniTek HD Waveform Monitor and Vectorscope
OmniTek HD-Display Waveform Monitor and Vectorscope
DVI-D Input
DVI-D Output (2042 & 2022 only)
Cine-tal Calibration Software and GretagMacbeth EyeOne Design
Cine-tal Calibration Software and GretagMacbeth EyeOne Display2
HD Test Pattern Generator
HD 30 Frame Framestore (2042 & 2022 only)
Wireless 802.11 ABG Networking
DC Power Input
VESA Mount Stand |
|
Notes: 1. Framestore, Cage, LUTs, & OmniTek options operate only in HD modes |
Specification subject to change without notice
 Cinemage Product Brochure
back to top
|
